ABOUT US
  SHOP
  PRODUCTS
  SUPPORT
  CONTACTS
  TERMS

Wellcome to ALVIDI!

AVR ATxmega Extended Module

NEU!  AL-XSLED_EXT shows an extended version AL-XSLED module. The module AL-XSLED_EXT was built also on the base of Atmel controller Atxmega256A3 and also has got JTAG and ISP connector, 4x programmable LED's, ext./int. AVCC voltage, internal 3.3 V of voltage regulator. In addition to the above mentioned equipment extended module includes: Reset key, power LED, miniUSB and microSD card slot. AL-XSLED_EXT has almost identical external pin configuration. more ...

AVR32 Board

We would like to introduce you a new product: AL-UC3AVRBIT. This board is based on Atmel controller AT32UC3A0512. It was developed for both private and industrial purposes. Its compact form and the circuit recommended by manufacturer were taken into account during development. In the documentation for this product you can read all the details. more ...

New version 2.0 from AVR Module with external SRAM

We introduce you a new version 2.0 - a modification of our AVR module: the model ERAM128. In comparison to the original model we have carried out some changes in this version. Now the module is top-side mounted, we have connected external SRAM directly to the controller and removed the SRAM-jumpers. The external Pins (port A and port C) which had been connected to SRAM, were removed. We have extended the module with Reset key and Power-LED. more ...

Boot loader for AVR/AVR32 Modules

To each of our AVR modules you will find with the description also a compatible boot loader. For programming you don't need any external program devices, but just two keys and a D-SUB 9 female connector. As software you will need a hyperterminal with Mega Controller and AVROSP program with the Xmega controller. AVR32 modules will be programmed via the USB-interface. You will find instruction for each AVR/AVR32 module in the attachment. At your request we can equip the purchased AVR module with the favoured boot loader free of charge. Every AVR32 controller includes a boot loader as factory setting.

Mega 128/2561/AT90CAN128  Xmega 128A1/256A3  AVR32

Mega-Boot  Xmega-Boot

AVR ATxmega - Development Module

AVR Module AL-XSLED with ATxmega256A3. In its construction form and the contents this module is similar to the module AL-AVREB. The module AL-XSLED is equipped also with 4x LED's, 2x RS232, quartz socket, ISP (PDI) and JTAG – connector. The size of this module is compatible also with the IC-socket 64-pin. IC-Socket makes possible the fast installation of AVR-Module and fits to the hole matrix board with the hole distance 2.54 mm. With the help of the quartz socket it is easier to decide for another processor frequency. more ...

AVR ATxmega - Development Module

This AVR module AL-XAVRB is equipped with the controller ATxmega128A1 of Atmel. The new generation of AVR controllers includes not only more power but also a lot of internal functions. AVR ATxmega - Module was built by the recommendation of the manufacturer and was extended with the following peripherals: SDRAM 64 MBit, MicroSD card slot, voltage regulator 3.3 V, JTAG, ISP (PDI), RS232 and external quartz 32.768 KHz. more ...

AVR32-Module with EEPROM

The AVR32 module AL-UC3BMB is a development board, which was built by the recommendation of the manufacturer. This module is equipped with another controller from the family AVR32. This model was specially developed to fit the IC-Socket 64-pin. This compatibility enables more flexibility and mobility by the development and installation. Besides that the AVR32 module includes an I2C / TWI EEPROM 8 Kbyte. You have two possibilities to program this module: JTAG connector and USB-Bootloader. more ...

AVR32-Module with AT32UC3A1512

The AVR32 module AL-UC3AEB is a board, which is equipped with an Atmel controller AT32UC3A1512 from the series AVR32 UC3A. This module includes 3.3 V internal voltage regulator. Therefore it is possible to supply the whole board over USB 5 V or external 5-12V DC voltage. This model contains two quartz: 12 MHz and 32.768 kHz and can be equiped with the third one. The RS-232 transceiver and USB interface make possible the connection of the module with the computer. more ...

The first steps with AVR32

Every AVR32 module is with the original USB-Bootloader of Atmel preprogrammed. To make the first step with the family AVR32 easier, we have equipped all our AVR32 modules with the necessary peripherals and documented the detailed description in the " First Step ". This document accompanies you beginning from the download of the software up to the programming of the module. more ...