AVR & AVR32
  Modules
  Equipment
  Programmer

AVR products and equipment

The AVR module AL-AVREB is a development board, which was built by the recommendation of the manufacturer. This module allows a very simple installation and usage for the beginner as well as for the advanced developer. By means of quartz socket it is possible to choose another frequency easier and faster. IC-Socket 64-pin enables a quick installation of the AVR module and fits in every hole matrix board with the 2.54 mm grid. You may purchase this AVR module in three designs: with ATmega128, ATmega2561 and AT90CAN128 controllers more ...

The AVR module AL-ERAM128 is a development board with the additional 128 Kbyte SRAM, which was built by the recommendation of the manufacturer. This module was developed for the higher memory requirements and enables a very simple installation and usage for the beginner as well as for the advanced developer. By means of quartz socket it is possible to choose another frequency easier and faster. All pins of micro controller are connected with the pins of module and positioned in the logical order, what makes the development easier. You may purchase this AVR module in three designs: with ATmega128, ATmega2561 and AT90CAN128 controllers more ...

This AVR module AL-XAVRB is equipped with the controller ATxmega128A1 of Atmel. The new generation of AVR controllers includes not only more power but also a lot of internal functions. AVR ATxmega - Module was built by the recommendation of the manufacturer and was extended with the following peripherals: SDRAM 64 MBit, MicroSD card slot, voltage regulator 3.3 V, JTAG, ISP (PDI), RS232 and external quartz 32.768 KHz. more ...

In its construction form and the contents this module is similar to the module AL-AVREB. The module AL-XSLED is equipped also with 4x LED's, 2x RS232, quartz socket, ISP (PDI) and JTAG – connector. The size of this module is compatible also with the IC-socket 64-pin. IC-Socket makes possible the fast installation of AVR-Module and fits to the hole matrix board with the hole distance 2.54 mm. With the help of the quartz socket it is easier to decide for another processor frequency. more ...

You will find this low cost IC-Socket 64-pin in our online-shop. Because of compatibility with the AVR modules AL-AVREB, AL-XSLED and AL-UC3BMB you have more flexibility during the development and installation. IC-Socket 64-pin enables a quick installation of the AVR modules and fits in every hole matrix board with the 2.54 mm grid. more ...

A cheap and very fast ISP-Programmer. Compatibel with all AVR controllers, which include ISP interface. Programmable with AVR Studio, AVRDUDE, Bascom and all other programs, which support STK500 protocol. Power supply by USB. With the ISP-Programmer it is possible to read, verify and program the flash, fuse bits and lock bits. more ...

AVR32 Produkte und Equipment

The AVR32 module AL-UC3AEB is a board, which is equipped with an Atmel controller AT32UC3A1512 from the series AVR32 UC3A. This module includes 3.3 V internal voltage regulator. Therefore it is possible to supply the whole board over USB 5 V or external 5-12V DC voltage. This model contains two quartz: 12 MHz and 32,768 kHz and can be equiped with the third one. The RS-232 transceiver and USB interface make possible the connection of the module with the computer. more ...

The AVR32 module AL-UC3BMB is a development board, which was built by the recommendation of the manufacturer. This module is equipped with another controller from the family AVR32. This model was specially developed to fit the IC-Socket 64-pin. This compatibility enables more flexibility and mobility by the development and installation. Besides that the AVR32 module includes an I2C / TWI EEPROM 8 Kbyte. You have two possibilities to program this module: JTAG connector and USB-Bootloader. more ...

Every AVR32 module is with the original USB-Bootloader of Atmel preprogrammed. To make the first step with the family AVR32 easier, we have equipped all our AVR32 modules with the necessary peripherals and documented the detailed description in the " First Step ". This document accompanies you beginning from the download of the software up to the programming of the module. more ...